44
control, DOUT2 control, DOUT3 control, DOUT4 control (expect excessive idling and Crash
detection). Excessive idling and Crash detection scenario has two states: Disable and Enable. All
scenarios can be activated at the same time and all scenarios that use DOUT can control the
same DOUT. Scenarios configurable parameters are shown in Figure 36. All values of these
parameters are described in Chapter 12.
Figure 36 FMB630 Scenarios configuration
6.3.6.3
Trip
Trip window offers user to configure Trip feature. If Trip is enabled configuration of
parameters is available:
Start Speed – speed, which is detected as minimum speed to indicate Trip start.
Ignition Off Timeout – timeout to wait if ignition was off, to detect Trip stop.
Remember iButton ID- Send ibutton value to server while trip is detected
Odometer Trip Mode – Between records or Continuous can be chosen. For this
feature I/O Trip Odometer value feature must be enabled.
