152
18.2
RS485 interface
Port connection diagram are shown on the Figure 116:
Figure 116 Port 1 connection diagram
Pins numbers 1 and 2 are intended to RS485 interface connection
19
RFID
Radio-frequency identification (RFID) is the use of a wireless non-contact system that uses
radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the
purposes of automatic identification and tracking. FMB630 can be configured in a way to use
with an RFID reader. When an RFID of some sorts (typically a plastic card with a magnetic line) is
used with an RFID reader which is connected to FMB630, the device creates a record with the
data that the RFID reader has read and can be sent to a server with all other information. RFID ID
is activated like an I/O parameter (Figure 117).
Figure 117 RFID I/O parameter
To set up FMB630 so it can be connected to an RFID reader, Global parameters have to be
set up. Go to extermal devices and set up COM1 or COM2 settings to RFID Mode or RFID MF7
Mode (the used mode depends on the mode that the RFID reader works). See Figure 118. The
Baudrates for each mode are:
RFID Mode – 57600
RFID MF7 Mode – 9600
