Teltonika FMB122, Quick Manual

Page: 12 / 16

12 FMB122 |
Wiki
POWER
Input voltage range 10-30 V DC with overvoltage protection
Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh)
Internal fuse 3 A, 125 V
Power consumption
At 12V < 6 mA ( Ultra Deep Sleep )
At 12V < 8 mA ( Deep Sleep )
At 12V < 11 mA ( Online Deep Sleep )
At 12V < 19 mA ( GPS Sleep )
At 12V < 34 mA (nominal no load)
At 12V < 1.5 A Max. (with full Load/Peak)
BLUETOOTH
Specification 4.0 + LE
Supported peripherals
Temperature and Humidity sensor ,
Headset , OBDII dongle , Inateck Barcode
Scanner, Universal BLE sensors support
INTERFACE
Digital Inputs 3
Digital Outputs 2
Analog Inputs 2
CAN Adapter inputs 1
1-Wire 1
GNSS antenna External (MMCX connector)
GSM antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM Dual SIM
Memory 128MB internal flash memory
PHYSICAL SPECIFICATION
Dimensions 65 x 56,6 x 20,6 mm (L x W x H)
Weight 55 g
OPERATING ENVIRONMENT
Operating temperature (without
battery)
-40 °C to +85 °C
Storage temperature (without
battery)
-40 °C to +85 °C
Operating humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery charge temperature 0 °C to +45 °C
Battery discharge temperature -20 °C to +60 °C
Battery storage temperature
-20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months
FEATURES
Sensors Accelerometer
Scenarios
Green Driving , Over Speeding detection ,
Jamming detection , GNSS Fuel Counter ,
DOUT Control Via Call , Excessive Idling
detection , Immobilizer , iButton Read
Notification , Unplug detection , Towing
detection , Crash detection , Auto
Geofence , Manual Geofence , Trip
Sleep modes
GPS Sleep , Online Deep Sleep , Deep
Sleep , Ultra Deep Sleep
Configuration and firmware update
FOTA Web , FOTA , Teltonika
Configurator (USB, Bluetooth), FMBT
mobile application (Configuration)
SMS
Configuration, Events, DOUT control,
Debug
GPRS commands Configuration, DOUT control, Debug
Time Synchronization GPS, NITZ, NTP
Fuel monitoring
LLS (Analog), LV-CAN200 , ALL-CAN300 ,
OBDII dongle, CAN-CONTROL
Ignition detection
Digital Input 1, Accelerometer, External
Power Voltage, Engine RPM (CAN
Adapters, OBDII dongle)