12
Safety information
This message contains information on how to operate FMB020 safely.
By following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and
follow them strictly before operating the device!
•
The device uses SELV limited power source. The nominal voltage is
+12 V DC. The allowed voltage range is +12
…
+30 V DC.
•
To avoid mechanical damage, it is advised to transport the device
in an impact-proof package. Before usage, the device should be
placed so that its LED indicators are visible. They show the status of
device operation.
•
Before unmounting the device from vehicle, ignition
MUST
be
OFF
.
Do not disassemble the device. If the device is
damaged, the power supply cables are not
isolated
or the isolation is damaged, DO NOT touch the
device before unplugging the power supply.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
Please consult representatives of your vehicle model
regarding OBDII location on your vehicle. In case you
are not sure about proper connection, please consult
qualified personnel.
The programming must be performed using a PC
with autonomic power supply.
Installation and/or handling during a lightning storm
is prohibited.
The device is susceptible to water and humidity.
Teltonika is not responsible for any harm caused by
wrong cables used for connection between PC and
FMB020
WARNING! Do not use FMB020 device if it distracts
driver or causes inconvenience due to OBDII
placement. Device must not interfere with driver.
Battery should not be disposed of with general
household waste. Bring damaged or worn-out
batteries to your local recycling center or dispose
them to battery recycle bin found in stores.
