Teltonica RUT950 User Manual Download Page 65

Page: 65 / 140

7.5.1.2

Interface

7.5.1.2.1

Security

Encryption – There are many modes of encryption, a distinctive classis pointed out below.

First select an encryption method: TKIP, CCMP, TKIP&CCMP and auto. Note: Some authentication methods won’t

support TKIP (and TKIP&CCMP) encryption. After you’ve selected your encryption method, you should enter your
passphrase, which must be at least 8 characters long.

7.5.1.2.2

MAC-Filter

Filter – you can define a rule for what to do with the MAC list you’ve defined. You can either allow only the listed

MACs or allow ALL, but forbid only the listed ones.

7.5.1.2.3

Advanced settings

Separate clients – prevents Wi-Fi clients from communicating with each other on the sane subnet.

Summary of Contents for RUT950













































































































































Search results

Summary of Contents for RUT950

Reviews:

Related manuals for RUT950

Brands by name

Popular brands

Teltonica RUT950, User Manual

Search results

Summary of Contents for RUT950

Reviews:

Related manuals for RUT950

Brands by name

Popular brands