INDICATING A BUTTON PUSH
If GH1202 is in standby mode you can check if the device is powered with a short
button push. The standby check is possible with each button on the keyboard. If the
device is powered, the Battery LED will lighten green.
Each button on the keyboard may have a special function and can be configured with
the Track Assistant Configuration Tool.
The button function can be recalled directly: If you keep on pushing the button after
the first sound signal a second signal (deeper signal, cancellation notification) will be
heard and all indicators turns off. Now you can release the button and none button
function will be executed at all.
SOUND INDICATION
Note:If the keyboard is locked, it will not be possible to switch on the device at all. If
you keep on pushing the switch-on button, the device will switch on and off
immediately. If the keyboard is locked, the device does not react to any button push.
The only exception is the Alarm button. Please view the Track Assistant Configuration
Tool explanation for further details.
After you have started to push the button, the Battery
indicator turns on but there is no sound signal; if you keep on
pushing the button, the GSM indicator turns on as well and a
sound signal (a beep) can be heard. Now the button has to be
released and the device will execute the button function.
Sound signal
Action
Function turned off
Function activated
one short beep
two beeps (high and low)
one short low tone beep
Error
Device switching off
Device switching on
special sound signal
special sound signal
one short beep
Outgoing SMS Notification
Incoming SMS Notification
Outgoing SMS Error Notification
two low tone beeps
special sound signals
special sound signal
Alarm Actuation Delay
10
Handheld GPS/GSM Tracker GH1202
User Manual v2.
2
4
