manualshive.com logo in svg

Teltone M-392, Product Manual, Page: 52 / 52

Share
Download
Teltone M-392 Product Manual Download Page 52

Page 44

Reference Manual

Index

Polling Controller and Line Sharing Switch

general description ................................. 2

Polling System

application............................................... 2
basic operation ....................................... 4

Port access priority at Line Sharing Switch

Dial Tone Delay............................... 11, 21

Port access priority at LSS

Modem disconnect, loss of carrier ........ 23

Power loss

at Line Sharing Switch ................... 11,  21

Priority Type

Daisy-chain ........................................... 32

Priority, emergency

defined ........................................... 11,  22
detailed operation .......................... 12,  23

Priority, no

defined ........................................... 11,  22
detailed operation ................................. 23

Priority, total

defined ........................................... 11,  22
detailed operation .......................... 12,  23

Privacy timeout ........................................... 14,  24
Privacy timeout at Line Sharing Switch ............. 23
Programming

local, Line Sharing Switch.............. 18,  28
remote, Line Sharing Switch .......... 19,  29

Programming commands

Line Sharing Switch ....................... 16,  26

R
Remote .............................................................. 42
Remote programming

Line Sharing Switch ....................... 19,  29

Return procedures

 ............................................ 37

Routing codes for LSS ports.............................. 18
Routing digits received by Polling Controller...... 13

S
Safety information ................................................ v
Specifications.............................................. 38,  39

T
Total priority

defined ........................................... 11,  22
detailed operation .......................... 12,  23

Total Priority

Daisy-chain .................................... 31,  32

Transfer code from Polling Controller................. 13

W
Warranty information................................... 36,  37

Summary of Contents for M-392





















































Reviews:

No comments