3.4 How to programme the BlueBox pro to get an outgoing line
Depending on the setup of your telephone system, different
parameters are necessary to be able to call the destination number.
3.4.1 How to programme flash time
It might occur that the BlueBox pro has to send a flash signal to your
telephone system first, so it is able to call an internal number at an
extension which automatically gets an outgoing line. For every
telephone system’s flash times are different, it is necessary to
adjust the BlueBox pro to your system. The flash time span needed
can be found in the technical data overview of your telephone
system.
Example: Programming flash time of 90ms
Pick up the receiver or push the handsfree key. You will hear a
sound created by your telephone system.
Dial the number of your extension line you connected the Blue Box
pro to. The BlueBox pro will answer after the second ring and send
3 sounds.
Enter the programming code *795#3#
After entering the second “#” you will hear an acknowledgement
signal.
Put the receiver down or push the handsfree key a second time to
finish programming. The feature is now programmed.
The BlueBox pro can be programmed with the following figures:
2 = 80ms flash
3 = 90ms flash
4 = 100ms flash
5 = 200ms flash
9 = flash disabled (basic setting)
