Telstra T310, User Manual, Page: 15 / 17

Help
28
Important safety instructions
Read and understand all instructions.
Follow all warnings and instructions marked on this product.
Do not use this product during an electrical storm, as it is possible to get an
electrical shock.
Do not use this product when near water, or when wet.
Make sure the line cords are protected from damage.
Keep the product away from heaters and away from sunlight.
Do not use this telephone near flammable gases or liquids.
Slots and openings in the cabinet are provided for ventilation, to protect it from
overheating. Ensure these are not blocked or covered.
Do not open the unit. There are no user serviceable parts inside. Warranty
conditions will not apply if the unit has been opened.
Unplug this unit before cleaning. Do not use detergents or sprays. To clean the
outside plastic parts, use only a damp cloth.
Do not push objects into ventilation openings. This could cause an electrical
shock.
General information
This Unit complies with Australian Communications Authority Technical
Standards. If the quantity of ringing devices connected to the telephone line
exceeds a REN of 3, it may result in some devices not ringing in response to an
incoming call. To check the REN of each device, refer to the base label.
Help
If you have any difficulty using your Telstra T310, this section provides
solutions to the most common problems.
No dial tone
●
Make sure the telephone line cord is plugged into the telephone socket
at the back of the unit and that the telephone line cord is connected to
your wall socket.
●
Check that no other extension is in use.
Calling Number Display not displaying incoming
numbers
●
To be able to receive and display messages, you must subscribe to the
Calling Number Display Service from your Network Provider.
Phone does not ring
●
Check that the ringer is not switched off on your T310.
●
Check that no other connected phones are off the hook.
●
Check whether you have too many phone extensions in your home or
office.
27