13
You can use the telephone for up to 15 hours with fully charged batteries. The
handset has a standby time of up to 200 hours.
After you have inserted the batteries for the first time, the battery display will
indicate the correct information on the charging status only after a complete
charging cycle. Use only approved rechargeable batteries NiMH AAA. Never use
disposable batteries/primary cells.
To keep your batteries in the best condition, leave the handset off the base for a
few hours at a time. Running the batteries right down at least once a week will
help them last as long as possible.
The charge capacity of the rechargeable batteries will reduce with time, giving the
handset less talk / standby time. Eventually it will need to be replaced.
Batteries and the handset may become warm during charging. This is normal.
Date and time
If you have subscribed to a Caller ID service and Auto Clock is set to on, see
“Switch auto clock on / off” on page 26, the date and time is set automatically
for all handsets when you receive your first call. If Auto Clock is set to off the time
and date does not set automatically.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press
m
, scroll
d
to
Clock/Alarm
and press
m
.
2.
Date & Time
is displayed. Press
m
.
3. Enter the date using the format DD-MM-YY e.g. 04/12/15 for 4 December 2015
and press
m
.
4. Enter the time using the 24 hour format
HH:MM
, e.g. 14:45 for 02.45pm and
press
m
.
5. Press
e
to return to standby.
Navigating the menus
The basic steps of navigating through the menu and on-screen options.
1. From the standby screen, press
m
.
The main menu is opened.
2. Use the
key for up (
u
) or down (
d
) to scroll through the menu.
3. Soft key options
OK
and
are displayed.
Press
m
to select
OK
and open a sub-menu or validate an option.
Press
b
to go back to previous menu level, correct a character or cancel an
action.
4. Press
e
to return to standby.
Colombo EN EU V2.indd 13
21/10/2015 08:51:07
