
6
Setting up the Telstra A60
Plan the location
Situate your A60 close enough to the phone socket so that the cable will reach.
Battery installation
For the display and handsfree features to operate you must install the 4 AAA
batteries supplied. You may also connect a mains power adaptor (not supplied)
which replaces the need for batteries. This mains power adaptor is also
necessary for the operation of Telstra Flashing Message Indicator (see page 15).
To purchase the optional power adaptor call TecHelp on 1300 369 193.
1. Remove battery cover from the bottom of the phone.
. Insert the four AAA size 1.5 volt alkaline batteries supplied.
3. Replace the battery cover.
Follow these steps to set up your Telstra A60.
Connecting the line cord
Insert one end of the telephone line cord into the socket at the rear of the phone
marked ‘Line’.
>YaKVVZRYXO]YMUO^
2KXN]O^MY\N