15
AUTOMATIC REFRIGERATOR
TRA560420MD
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the
refrigerator may still have refrigerator and freezing function with the following faults, the user shall contact
maintenance specialist for maintenance, so as to ensure normal use of the refrigerator.
4 FAULT INDICATION
Refrigerator temperature sensor fault LED1/LED2 flashing
Freezing frost sensor faults LED1/LED3 flashing
E1
E2
E5
Communication failure LED2/LED4 flashing
E6
E7
Freezer temperature sensor fault LED1/LED5 flashing
Ring temperature fault LED1/LED4 flashing
Fault Code
Fault description
4. Maintenance and care of the appliance
4.1 Overall cleaning
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and
energy saving.
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth
dampened with soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odor.
Please turn off the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and
a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry
naturally before turning on the power.
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with
some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the
refrigerator or contaminated food.
