31
INDUCTION COOKER
TPI028210MD
8. CARE AND CLEANING
What?
How?
Important!
Everyday soiling on glass
(fingerprints, marks, stains
left by food or non-sug-
ary spillovers on the
glass)
1.
Switch the power to the cooktop
off.
2.
Apply a cooktop cleaner while
the glass is still warm (but not hot!)
3.
Rinse and wipe dry with a clean
cloth or paper towel.
4.
Switch the power to the cooktop
back on.
•When the power to the cooktop is
switched off, there will be no ‘hot surface’
indication but the cooking zone may still
be hot! Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become stained
Boilovers, melts, and
hot sugary spills on
the glass
Remove these immediately with
a fish slice, palette knife or razor
blade scraper suitable for Ceramic
glass cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the cooktop
off at the wall.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or spill to
a cool area of the cooktop.
3. Clean the soiling or spill up with a
dish cloth or paper towel.
4. Follow steps 2 to 4 for ‘Everyday soil
-
ing on glass’ above.
• Remove stains left by melts and sugary
food or spillovers as soon as possible. If left
to cool on the glass, they may be difficult
to remove or even permanently damage
the glass surface.
• Cut hazard: when the safety cover is
retracted, the blade in a scraper is
razor-sharp. Use with extreme care and
always store safely and out of reach of
children
Spillovers on the
touch controls
1. Switch the power to the cooktop
off.
2. Soak up the spill
3. Wipe the touch control area with
a clean damp sponge or cloth.
4. Wipe the area completely dry
with a paper towel.
5. Switch the power to the cooktop
back on.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe the
touch control area dry before turning the
cooktop back on.
