INDUCTION COOKER
TPI001210MD
11
For oil spots on the cooker plate, wipe the cooker plate by using a soft moist cloth with a little tooth paste or
mild detergent. And then use a soft moist cloth to wipe it until no stain remains.
When not using it for a long time, please disconnect the power plug from the power outlet and protect the
induction cooker from any dust or bugs.
V. CLEANING AND MAINTENANCE
VI. TROUBLESHOOTING
Abnormalities
Key checking points and trouble shooting
After plugging in the power cord and
pressing the “ON/STANDBY” key, the
indicator and display do not light up.
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord
damaged?
The “ON/STANDBY” indicator lights
up and the display works normally,
but heating does not start.
Is the pot material proper?
For other causes, please take the appliance to a
reparing and maintenance
Heating suddenly stops during the
process.
Is the temperature of the oil too high when frying
dishes?
Is the temperature of the surroundings very high?
Is the air inlet or air outlet of the induction cooker
blocked?
Is the default heating time of the induction cooker
over?
The self-safety protection of the induction cooker
starts, wait for several minutes and connect power to
use it.
Code of failure
E3 E6
Wait a moment and press the “ON/STANDBY” button
when the temperature of the hotplate becomes
normal,
the induction hotplate will operate as usual.
Turn off the hotplate, when the voltage becomes
normal, and then turn on the hotplate, it will operate
as usual.
E7 E8
E1 E2 E4 E5
Eb EA
Please contact the special maintenance
department
Emergency
During using, if there are some abnormal cases, please unplug immediately and disconnect power.
For any failure of the product, please contact the special maintenance department or the customer service
center.
