7
BLUETOOTH WIRELESS
TAB001920HV
Power On
Long press the MFB for 3 seconds, LED flashes white for twice. Bluetooth connection Follow the steps (Please
make sure that your phone is built-in Bluetooth function)
1.
Hold down the MFB for about 5 seconds, till LED alternately flashes white and orange, the headset enter
the pairing status.
2.
Activate the Bluetooth function and search for “H978BT” referring to your phone instructions.
3.
Manually click “H978BT” to connect. If the LED stop flashing with a voice prompt, the connection is suc
-
cessful
4.
Pairing mode can last 3 minutes. If you miss the pairing time, you need to restart the device and operate
follow the procedural steps mentioned above
5.
When turning on, the headphone can automatically connect the last device that you had paired. (Make
sure the Bluetooth function of the last paired device has been on when the headphone is entering the pairing
status.)
6.
The headphone will automatically turn off, if the headphone has no connection or lose the connection for
3 min. Power off Hold down the MFB for about 3 seconds, LED flashes orange for a while
Answer incoming calls
Short press the MFB to a swer incoming calls Tip: Since some mobile phones default to answer calls via their
own receiver, please refer to the instructions of your phone and set on your phone.
End the call
Press the MFB once to end the current call communication.
Refuse incoming calls
Press the MFB for 2 seconds when there comes a call
Last number redial
Double press the MFB to redial the last calling number
Music playing
1.
Play/Pause: Short press the MFB;
2.
PREV: Long press +ko select the previous song
Summary of Contents for TAB001920HV
Page 1: ...AUD FONO BLUETOOTH TAB001920HV...
Page 10: ...BLUETOOTH WIRELESS TAB001920HV...
