Telsa TS 8643, Instruction Booklet

Page: 17 / 40

EN -16-
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package for
re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning
and transportation.
Carry your fridge in the upright position.
Repositioning the Door
• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
BEFORE CALLING YOUR AFTER SALES
SERVICE
CHAPTER - 5
CHAPTER - 6
What to do if your refrigerator does not operate:
Check that:
• Your fridge is plugged in and switched on,
• The fuse is not blown and there is not a power cut,
• The thermostat setting is in the on the "1" position,
• The socket is no longer functioning. To check this, plug in an appliance that you know
is working into the same socket.
What to do if your refrigerator performs poorly:
Check that:
• You have not overloaded the appliance,
• The doors are fully closed ,
• There is no dust on the condenser,
• There is enough space for air circulation at the rear and side of the appliance.
Check Warnings;
Your fridge warns you if there is/are some part(s) out of order. In this case, LED around the
button will blink and buzzer will sound beep.
ERROR TYPE MEANING WHY WHAT TO DO
SR
"Failure
Warning"
There is/are some
part(s) Out of order
Call Service for
assistance as soon as
possible.