Page 5
Upon receiving the product, please unpack the product package carefully. Each product is shipped with
the following items:
Table 2-1 Packing List
Outdoor CPE Products
Quantity
ODU unit
1
Power adapter
1
Power Line
1
Mounting brackets
1
PC Ethernet Cable
1
If you find any of the items is missing, please contact our local distributor immediately.
CPE Unit
：
Unpacking the Equipment Table 2-1 lists all the standard parts that are supplied in your LTE CPE
Unit Installation Package. Please take the time to unpack the package and check its contents
against this list.
2.2.
Installing the Equipment
Device logic connection
For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to
avoid direct sun light exposure which may cause over heat in certain extreme weather condition.
The CPE should be properly grounded for proper protection against lighting or power surge.
To power on the device, the outdoor CPE must uses a 48V PoE integrated DC power supply
adapter. The power adapters can operate in 90-250V AC range and therefore can be used in
different country. Once the device is powered up, the user should wait for about 2 minutes before