APPLICATION
7
Instructions
At the left hand side, From left to right, There are 3 LEDs indicate the three sweep functions controlled by the
function key.
Orange LEDs at the left
1. First LED, when LED lights for 10 seconds, 0-100Khz swept. The last one second is increased for 1Khz.
This mode is recommended for CD.
2. Seconds LED, 0-100Khz sweep for 1 minute
3. The third LED, 0-100Khz sweep for 5 minutes.
A
Green LEDs at the right
At the right hand side, From left to right, There are 4 LEDs.
1. The first three LEDs indicate the Battery percentage.
first 33%
seconds 66%
third 100%
2. The forth LED indicates when charging.
B
Power off function
During Quantum sweep, you can force power off by click and hold the button for 2 seconds,
The 4 blue LEDs will blink. And the power will turn off
C
Memorize function:
During Quantum sweep, you can save the current function for the next time you use.
By click and hold for 4 seconds, the LEDs will blink again after power off, then your current function is saved.
D
A
B
C
C
C
C
C
