6
| Section 2
4.
Return Button:
The return button is adjacent to the control knob and will step back from a selected option. Repeated
presses of the return button will switch the display between the menu and metering display.
5.
Headphone Jack:
1/4” Stereo TRS Jack switching between input and post-process output audio monitoring.
6.
Headphone Volume Knob:
The headphone volume knob controls the output level of the audio being sent to the headphone jack.
Pressing the headphone volume knob will toggle the headphone output between the input audio and
the post-process output audio.
Connections
1.
AC Mains connection:
110 - 220v auto-switching power connection. Use supplied power cord appropriate for your area.
2.
LAN Network
The LAN network jack is a 10/100 RJ45 jack and can be used on a Livewire network for source audio
and post-process audio monitoring. The LAN network can also be used to access ProSTREAM’s
internal web configuration pages. The LAN network may also be used for connection to the stream-
ing server instance.
3.
WAN Network
The WAN network jack is a 10/100 RJ45 jack which can be used to access the streaming server instance
if the streaming server is running on a network other than a local or Livewire network. Typically, this
would be an Internet accessible network connection if connecting to a streaming relay service.
4.
Analog Audio Inputs:
(female 3-pin XLR, left & right)
5.
Analog Audio Outputs:
(male 3-pin XLR, left & right)
6.
USB
Future use
7.
Parallel Interface
Future use
Editing Text
When a text field is displayed, press the main knob to enter edit mode. If the field was previously blank, you
will now be in text entry mode (a solid cursor is displayed) otherwise you will be in erase mode (a rectangle
cursor). In text entry mode mode, turning the knob cycles though all available characters while pressing the
knob selects the current character and moves the cursor to the next character position. While in text entry
mode, pressing the Return button once switches the cursor to erase mode. In erase mode, turning the knob
erases (or restores) characters. While in erase mode, pressing the main knob switches back to text entry
mode while pressing the return button exits the field editing altogether.
4
5
6
2
3
7
1
