Telonics PRE-200 Preamplifier
5
PB-008684 Rev A
PRE-200
P
REAMP
C
ONTROL
F
UNCTIONS
,
J
ACKS
,
&
I
NDICATORS
:
F
RONT
P
ANEL
(
CONTINUED
)
Master Level
Sets the overall output level of the preamp. Typically used between 5 and 8.
Overload indicators Red LED indicators only turn on in a rare instance when peaks are hit. Indication
of soft clipping may occur, but you’ll probably never hear it. There is a separate
overload indicator for Preamp and Master levels.
Headphone Level
Adjusts headphone output level. Turn down when not in use.
Headphone Jack
1/4" stereo jack for headphones. This unit puts out up to half a watt per channel
into 8 ohms – more than enough for any player at home. We recommend quality
headphones such as Sony MDR 7505.
Tuner Out
Buffered output so it will not load down the pickup or the rest of the signal chain,
nor will it allow noise from the tuner to get back into the system. May be used
simultaneously with the Tuner Out jack on the rear panel. Output impedance is
approximately 500 ohms.
Mute
Yellow LED comes on when muted. Tuner, Effects and Headphones remain on
to allow for string replacement, practice licks, tuning, and effects adjustment.
Power Amp outs and XLR feeds are disabled in mute mode.
Power
Turns the unit on and off and is indicated by a blue LED. A time delay is built
into the audio circuits to minimize “pop” when turning on or off.
