- While the device is running, please hold the safety
rope with one hand and take the device from the
window with the other hand.
- Turn off the power switch in a safe area.
Safety rope
- Check if the safety rope is broken or the knot is loose
before use.
- Fasten the safety rope and tie it to an indoor fixture
before use.
- The UPS function will be enabled automatically when
no electric power is supplied. The battery backup will
supply enough energy to keep the device attached to
the window for about 20 minutes.
- If no electric power is supplied, the device will stop
automatically, emit an alarm, and flash a red light. The
user must take the device from the window as soon as
possible.
- The user can recover the device by pulling from the
safety rope. Pull lightly from the safety rope at an
angle close to the glass to prevent it from dropping.
Please, make sure the battery is fully charged (green
light ON) before use.
- Turn off the power switch on the device and plug it to
the power supply. An orange light turns on while
charging.
- The green light turns on when fully charged.
