EN
Status
Digital
Power
Note
Charging state
(charging the power
bank)
Flashing
Digital precision display During charging, if
digital display is 100,
and is not
fl
ashing,
then the power bank is
fully charged.
Discharge state
(charging a device)
No
fl
ashing
Digital precision display During discharge, if the
digital display is 00,
then the power bank is
out of power.
No-loading status
(power bank no load)
No
fl
ashing
Digital no-precision
display
During, no loading
process, push the
bu
�
on, the power
bank will be
automa
�
cally o
ff
, a
�
er
digital displaying for 30
seconds.
5. Troubleshooting
1.Unable to charge power bank
Check if the power adapter is the right one and if the cable is
not broken.
2.Power bank unable to charge your device
-Power bank capacity is running too low. Charge your power
bank first.
-Wrong connection between your power bank and the device
(input port instead of output).
-Power bank failure.
6. Usage tips
-Please charge your power bank at least once every 3
months if not in use for a long time.
-Make sure to check that the voltage of the device you intend
to charge is compatible with this power bank.
-While in use your power bank might get a bit hot.
This is normal as long as the temperature does not
surpass 60 ˚C.
-Keep your power bank dry, do not wipe with powerful
chemical cleaners.
-After your device is fully charged, please unplug it from
the power bank since it will keep consuming electricity at
a slow rate.
-Users are responsible for using this product correctly
and following the instructions provided in this manual.
Misuse of this product may lead to shorten the product
life and withdraws any warranty liability from the
manufacturer.
