Using the power bank
Cable charging
1.Press the power bank's On button.
2.Connect one end of the USB cable to the power
bank’s USB charging port. Then, plug the other end
of the USB cable into the mobile device’s
multipurpose port.
3.When connecting the device to the power bank,
the digital display will indicate and show the
remaining power of the power bank.
4.After the mobile device is fully charged,
disconnect the USB cable from both devices.
Attention
USB fast charging ports and Type-C PD port need
the specific fast charging cables to quickly
recharge the compatible devices.
Wireless charging:
1.Press the power bank's On button
2.Wait for the wireless charging indicator to turn
blue and blink 3 times, then it will turn off for 2
seconds, and then light up again.
3.The indicator will remain active for 7 seconds,
giving you time to place your smartphone on the
specially designated spot. Note that the
smartphone must support wireless charging.
4.The indicator will continue to blink regularly
throughout the wireless charging process to
indicate that the power bank is in use.
5.When the mobile device is fully charged, remove
the mobile device from the power bank.
