Tellur Gliss, User Manual

Page: 5 / 7

Bluetooth playing mode
1.Press the power button to turn the speaker on and enter the
Bluetooth mode.
2.Activate the Bluetooth function on your device (mobile phone/
tablet/ etc.), search for “Tellur Gliss” and connect it. If your phone
requires a password or a PIN number, enter 0000 and confirm it.
3.Press the Play/ Pause button to play/pause the music.
4.Adjust the volume and go to the next/last song by pressing “+”
or “-“ buttons.
5.Short press the button to answer/end calls. The speaker will
resume playing music after you end your call (if the audio source
did not stop or is still in range).
Playing music from USB flash drive or microSD card
1.Turn the speaker on.
2.Insert a USB flash drive or a microSD card (up to 32GB) into its
slot - the speaker will play the stored music automatically.
3.In playing mode, press Play/ Pause to play or pause.
AUX-IN
1.Turn on the speaker.
2.Use the audio cable to connect the speaker with your device
(PC, mobile phone, TV etc.).
3.Long press “+” or “-“ button for volume up/down.
4.Press the to switch to other modes.
FM Radio
1.Turn on the speaker and insert the MicroUSB cable as the
antenna.
2.Short press both “+” and “-“ buttons at the same time until you
hear the prompt for radio and please insert the AUX cable as the
antenna (without connecting the other end of the cable to another
device).
3.Short press the Play/ Pause button to automatically search and
memorize FM channels.
4.Short press the Forward/ Backward button to move between FM
channels.
True Wireless Stereo function:
1.Turn on two identical Gliss speakers you want to pair, both in
Bluetooth mode.
2.Turn off the Bluetooth on the device you connected your speaker
to, long press button of either speaker - you will hear a sound
confirming that the speaker 1 will begin pairing with speaker
2. 1Once the two speakers are successfully paired, you will hear a
sound.
3.Turn on the Bluetooth on the device you want to play music from
and connect it to the speaker 1. The music will be played by the
both speakers at the same time.
Note!
1.When you connect the speaker to your device via Bluetooth, if
asked to enter a password, simply enter ‘0000’ and click ok.
2.The TWS connection must be done before connecting one of the
speakers to your phone/ tablet via Bluetooth.
How to charge the speaker:
1.Power off the unit, put the provided charge cable into the charge
slot and connect the other end to PC or other charger.
2.Status LED indicator will be red during charging and it will turn
off when fully charged.
Note:
Do not let children play with the speaker.
Do not throw the product into fire.
Do not use it in very humid or high/low temperature environ-
ments. Product performance will decrease when used in such
environments.