Installation
1. Turn off the car engine.
2. Find a suitable position in the car. Camera’s position
should not affect driving. Wipe the windscreen where you
want to place the device. Install the bracket and hang the
recorder.
3. Adjust the lens position to ensure that it is level with the
ground.
4. Plug one end of the USB cable into the USB port of the
recorder and the other end connect to the USB port of the
car charger.
5. Start the car’s engine and check that the camera is
installed correctly.
Recording/ taking a photo
1. Recording mode
While the camera is in video mode, the video icon will be
displayed in the upper left corner of the screen and starts
to record. While recording, there is a red dot flashing on the
screen and, at this moment, you cannot operate the menu
or switch working mode. Press OK to stop recording.
2. Photo Mode
When in standby, long press M button to switch to photo
mode. The photo icon will be displayed in the upper left
corner of the screen. Press OK to take a picture. The screen
flashes once when taking a picture, indicating that the
photograph is taken. Press the menu key to set the photo
menu, and press M to switch to playback mode.
3. Video/ Photo playback
Long press M in photo mode to switch to playback mode.
The playback icon will be displayed in the upper left
corner of the screen.
Press Up button to select files above.
