11
Counting - Bills
Counting Loose Bills
Count one denomination at a time.
Use the
key to select the denomination. Stack the
bills against the short side of the Money Platform with
the platform up as per diagram.
Stack in batches of 15-20 bills at a time without
removing them. T-i
X
will beep to confirm the money
has been placed on the Money Platform.
Leave the first stack on the Money Platform and add
the next stack of the same denomination. When
finished with a denomination remove all of the bills
together. T-i
X
will beep to confirm the money has been
counted and added to the total.
Counting Strapped Bills
Straped bills (e.g. 50 or 100 bills) of the same
denomination can be counted without removing the band.
Use the
key to select the denomination.
Press the left hand
key to select Strap mode. Put
the first Strap on the money platform. When the value is
displayed, more strapped bills of the same denomination
may be added.
If REMOVE BAND appears, remove all the bills from the
money platform, press the left hand
key to select
“loose” count mode and count the last Strap in batches of
15-20.
Counting clipped bills*
*
Clips must be
calibrated prior to use
Use the
key to select the denomination.
Press the left hand
key to select clip mode. Put
the first clipped Strap on the Money Platform. When the
value is displayed, more clipped bills may be added.
If REMOVE CLIP appears, remove all the bills from the
Money Platform, press the
key to select loose
count mode and count in batches of 15-20.
Stack without
removing
15-20 Bills
CLOSEOUT
#1 Total = $16.09
$75.00
Bills
$5
USD
x 15
Loose
CLOSEOUT
#1 Total = $92.09
$500.00
Bills
$5
USD
x 100
Strap
CLOSEOUT
#1 Total = $592.09
$50.00
Bills
$5
USD
x 10
Clip
