TellCard Systems EGT/E6291(2) KB(2), Programming Manual

Page: 4 / 15

4
P
ro
g
ra
m
m
in
g
1. Understanding Light and Beeper Feedback:

Success : Two short beeps and green LED

Error: Long beep and red LED

Low battery : Success beep immediately followed by long error beep

Factory reset : Lights rapidly flashing
2. Keypad Backlighting:
Press and hold any number key to illuminate the keys. Backlight will automatically
turn off after 5 seconds of inactivity.
3. Steps to Fully Configure Lock
4.
Setting Master Code
A. After initial battery pack installation LEDs above keypad will flash rapidly,
indicating lock is waiting to accept master code. To conserve battery,
LEDs will flash for two minutes.
B. Door is unlocked until a valid master code is entered.
C. Choose and enter a 4-8 digit master code. Press * to complete.
D. Device locks after master code is entered.
DEVICE IS NOW LOCKED AND OPERATIONAL WITH MASTER CODE.
Function Overview:
Mode Lock Function Page Number
0 Emergency Lockdown – Mode 0 Page 7
1 Relock – Mode 1 Page 7
2 Passage – Mode 2 Page 8
9 Permanent Passage – Mode 9 Page 8
SET
MASTER
CODE
SET
USER
CODES
CONFIGURE
FUNCTIONS
(OPTIONAL)
CONFIGURE
SETTINGS
(OPTIONAL)
GO!