3
1 Main functions of GSM Pager3 Z6
Possibility of using as alarm control panel accessory, GSM transmitter, or as a 6 zone
GSM control panel armed/disarmed independently.
Further functions:
Sending SMS with adjustable message for each event
Reports events and restorations in SMS, voice call to users and monitoring station
Arming / disarming, status query and relay control through phone call
2 Installer
settings
Settings can be edited using the “
GSM Pager3 Z6 Remoter
” software. Do not open the
software after installation, connect the module to USB first and let the OS install the
necessary drivers! The desired program language can be selected using the flag icons
in the lower right corner of the software window. If necessary, the version of the
programming software can be updated by clicking on the “
Search for program
updates
” link on the “
Connection
” page. The update procedure requires internet
connection. Here it can be also configured, if the program should search for updates
automatically upon each opening, or this is performed manually by clicking on the
search link.
2.1 Setting parameters through USB serial connection
Start the „
GSM Pager3 Z6 Remoter
” software and select
Connection
page
Select the option of connecting the module via USB cable
Power up the module. Powering from USB is not sufficient!
Connect the USB cable in case you have not connected the module to PC yet
As soon as the program has recognized the USB port used by the module, it will
request the module password, establish connection and then a green tick icon
appears next to the USB icon in the upper right corner of the main window, then
the module version is displayed. (The program does not request the module
password if the default password is set in the module:
1111
)
Thereafter settings, module status monitoring etc. become available
When configuration of the settings is finished, disconnect the module from USB.
