tell ecoLINE PRO, Installation And Application Manual

Page: 33 / 60

33
Installer access permissions :
In this section you can enable or disable the installer’s access to protected settings (for the user
who sings in with the installer password). The installer can change only settings options which are
enabled in the list.
Device locks :
SIM card lock : if you enable this option, the device will register the ID of the SIM card installed,
and will refuse to operate with any other SIM card until you disable this option.
Disable factory reset : you can lock your device with this setting, so that the factory default
settings cannot be restored without signing in with the Superadmin password. If you enable this
option, restoring the factory default settings will be disabled. In this case you can restore the
factory default settings only after signing in with the Superadmin password and disabling this
option. If you forget the Superadmin password, only the manufacturer can restore the factory
default settings in the service center. If this option is disabled, the device will be unlocked and
factory default settings can be restored anytime, even without signing in with a password.
Cloud settings:
Enable cloud usage : enable this option if you want to use the device with the mobile application,
or if you want to access it remotely with the programming software over cloud connection.
If this option is enabled, the device will connect to the server operated in the cloud by the
manufacturer, and will stay connected permanently, thereby it will be available through the Internet
anytime. If this option is disabled, the device will only connect temporary to the cloud when there
are Push messages to send, therefore it will be essentially unavailable with the mobile application.
You can also initiate a temporary cloud connection manually, by sending a request by SMS to the
phone number of the device. You can read more about this in the “
Remote connecting to devices
via cloud service
” paragraph. Maintaining the cloud connection and cloud usage involve use of
mobile data. In order to ensure a continuous connection and availability, the device sends
supervision messages that use about
12 MB data per month on its own.
In case of using a SIM card that uses a private APN, the given private APN should be opened at
the mobile service provider to access the cloud server IP address at 52.30.109.179, port: 2020.
Please note that the settings have to be written in the device in order to be applied after a
change is made. For this, click on the “Write”
button.