Adapter2 / Adapter2 PRO Quick Guide
5
If the
Cloud usage
option is enabled, the device can be accessed at any time
via the cloud server. This is absolutely necessary if you want to use the mobile
application. Otherwise, it will only connect upon request sent via SMS to the
phone number of the SIM card installed in the device:
CONNECT,PWD=
device password
#
(e.g.
CONNECT,PWD=1234#
)
After the connection has been established successfully, the device sends
a response SMS, which contains the server contact details and the
Device ID
.
Registering the device identifier:
The device can be identified and accessed remotely based on its unique device
identifier. You can read and copy the device ID to clipboard in the
Status
monitoring
menu.
You can store the device contact details (name, device identifier, comments)
using the
Add new
button in the
Device register
menu, which will help you
later, when you want to access the device remotely.
Remote access via cloud service
:
•
Open the
Adapter2
programming software.
•
Click on the
Connection type
menu and select the
Cloud
option.
•
If you have already registered the contact details of the device in the
Device
register
menu, select the device you want to connect to in the
Device name
drop-down menu. Otherwise, select the server from the
Cloud
drop-down
menu, enter the
Device ID
of the device and the
Device password
.
•
Click on the
Connect
button.
For further connection options, see the
Installation and Application Manual
of
the
Adapter2
.
-> Chapter 4 of the Installation and Application Manual.