GZT TELKOM-TELMOR Sp. z o.o., ul. Schuberta 104, 80-172 Gdańsk, Poland
T: +48(58) 3823 349, e-mail: export@telmor.pl, www.telmor.pl
4.
Programming
The device is programmed using the display and a 5-button keypad. The programming procedure for individual parameters is given below.
During the powering up:
the programming mode is on standby:
if no changes are made in the programming, the system is configured as follows:
o
UHF1 -> 0 UHF filters
o
UHF2 -> 0 UHF filters
o
UHF3 ->10 UHF filters
all UHF filters are deactivated (the display shows “off”),
dampers are in zero position.
4.1 Return to default settings
If it is necessary to return to default settings:
1. Unplug the power cable
2. Press esc and keep it depressed
3. Plug the power cable
All programming parameters are deleted and the display shows the message “Default Settings.”
4. Release the esc button
Confirm the value (
V
)
-
browse menu functions,
-
increase the displayed value "+"
- browse the menu,
- decrease the displayed value "-"
Return to the previous menu (
^
)
