manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 71

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

71

2018-02-16

PRELIMINAR

Y

Synchronous Response

Table 125, page 71

, describes the synchronous responses and remarks for NDNS Server 

Start command.

8.2.2  Get NDNS Server Start

This command is used to get the status of the DNS server being started.

Command Syntax

AT+NDNSSSTART?

Parameter Description

Table 126, page 71

, describes the Get NDNS Server Start parameters.

Response

Table 127, page 71

, describes the responses and remarks for Get NDNS Server Start 

command.

Table 124   NDNS Server Start Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 125   NDNS Server Start Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 126   Get DNS Server Start Parameters

Parameters Mandatory/Optional

Value

Description

Status

Mandatory

Value range:

 N/A

Format:

 String

Default value:

 

N/A

It indicates the status of the server 
(STARTED or NOT STRARTED).

Table 127   Get NDNS Server Start Response

Responses

Remarks

STARTED

Success.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands