manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 135

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

135

2018-02-16

PRELIMINAR

Y

Example 

AT+FUHTTPC="192.168.45.22", 80, "\ota.bin", 100
OK

10.2.1.1.2  FWUP Trial Image

This command is used to handle the trial image after a successful firmware upgrade.

Once the firmware upgrade is successful, the new firmware is stored in flash trial image 
location. The trial image can be accepted / rejected using this AT command - if accepted, 
the trial image is moved from trial image location to current image location in Flash and if 
rejected, the trial image is removed from flash.

Command Syntax

AT+FUTRIALIMG = [<Accept/Reject Image Flag>, <Reboot Flag>]

Parameter Description

Table 294, page 135

, describes the FWUP Trial Image parameters.

Response

Table 293   FWUP HTTP Client Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

NOTE:  

The firmware upgrade is done from current location only. After a firmware 

upgrade, the next firmware upgrade is done only after accepting or rejecting the 
trial image.

Table 294   FWUP Trial Image Parameters

Parameters

Mandatory/Optional

Value

Description

Accept/reject 

Image Flag

Optional

Value range:

 0,1

Format:

 Integer

Default value:

 1

It specifies the trial image handling flag 
where,
0- specifies the rejection of trial image and
1- specifies the acceptance of the trial 
image.

Reboot Flag

Optional

Value range:

 0,1

Format:

 Integer

Default value:

 1

It specifies the reboot after the acceptance 
of trial image (moved from the trila image 
location to current image location in the 
flash) where,
0 - indicates to No reboot and
1 - indicates to Reboot.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands