WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 10 of 79
2021-10-25
Not Subject to NDA
Convention Type
Description
LINE
End-to-line input token
Indicates user input of any string, including spaces. No other parameters may
be entered after input for this token.
string of words
WORD
Single token
Indicates user input of any contiguous string (excluding spaces).
singlewordnospaces
2.1.2.
AT Command Syntax
Following table describes the syntax rules followed by Telit implementation used in this
document for software procedures that are explained using the AT command line
interface.
Table 4: Command Syntax.
Convention Type
Description
command syntax monospaced font This monospaced font represents command strings entered on a command line
and sample source code.
AT XXXX
Proportional font description
Gives specific details about a parameter.
<Data> DATA
UPPERCASE
Variable parameter
Indicates user input. Enter a value according to the descriptions that follow.
Each uppercased token expands into one or more other token.
lowercase
Keyword parameter
Indicates keywords. Enter values exactly as shown in the command description.
