Telit Wireless Solutions WE310F5-I Hardware User'S Manual Download Page 3

WE310F5-I/P EVB Hardware User Guide 

1VV0301663

 

Rev.1

 

Page 3 of 20

 

2020-08-10  

USAGE AND DISCLOSURE RESTRICTIONS 

I.  License Agreements 

The software described in this document is the property of Telit and its licensors. It is furnished 

by express license agreement only and may be used only in accordance with the terms of such 

an agreement. 

II.  Copyrighted Materials 

Software and documentation are copyrighted materials. Making unauthorized copies is 

prohibited by law. No part of the software or documentation may be reproduced, transmitted, 

transcribed, stored in a retrieval system, or translated into any language or computer language, 

in any form or by any means, without prior written permission of Telit. 

III.  High Risk Materials 

Components, units, or third-party products used in the product described herein are NOT fault-

tolerant and are NOT designed, manufactured, or intended for use as on-line control 

equipment in the following hazardous environments requiring fail-safe controls: the operation 

of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic 

Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) 

specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. 

IV.  Trademarks 

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service 

names are the property of their respective owners.  

V.  Third Party Rights 

The software may include Third Party Right software. In this case you agree to comply with all 

terms and conditions imposed on you in respect of such separate software. In addition to Third 

Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall 

apply to the Third Party Right software. 
TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM 

ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY 

MATERIALS  INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM 

WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE 

OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, 

INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY 

OR FITNESS FOR A PARTICULAR PURPOSE. 
NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY 

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 

DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED 

AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING 

IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE 

EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND 

THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES. 
 

Summary of Contents for WE310F5-I





















Reviews: