Page
10
of
17
6/16/2017
If the jumper is not present you can use one jumper present on USB jumpers on the EVK2
reserved for the the connection audio1 and audio 2 (red circle on the picture below).
Finally be sure that the USB Jumpers on the EVK2 are selected on USB as in the picture
below:
.
RE866 Interface without EVK2
The interface can be used also standalone without mount it on top of the EVK2 but in this
case you need and FTDI for the serial connection that is at 3.3Volt and set the power
selector register (J100) to use the external power supply as in the figure below.
Summary of Contents for RE866
