NE310L2 Hardware Design Guide
1VV0301711 Rev. 2
Page 27 of 64
2021-06-22
Output current
-
1mA
3mA
Table 11: Operating range characteristics of PWRMON signal
Note: The Output Current MUST never be exceeded; care must be
taken when designing the application section to avoid an excessive
current consumption. If the Current exceeds the limits it may cause
a module shutdown.
Warning:This signal is NOT provided in order to supply small devices
from the module.
PWRMON is only a module power-on indicator.
Note: PWRMON during PSM period is LOW ( PSM has to be
previously enabled by AT+CPSMS command)
