LN920 TLB Hardware User Guide
1VV0301735 Rev. 0
Page 12 of 33
2021-07-15
Not Subject to NDA
(5)
FULL_CARD_POWER_OFF_N / W_DISABLE_N
Figure 7: Auto Power ON / W_DISABLE_N
- FULL_CARD_POWER_OFF_N
Place jumper on PL214 1-2: LN920 Power ON
Remove jumper from PL214: LN920 Power OFF
- W_DISABLE_N
Connecting a jumper to PL201 activates the W_DISABLE_N function. (Power
Saving Mode).
Please refer to the AT#PSMWDISACFG section of the LN920 AT Commands
Reference Guide.
(6)
Other Jumpers and Connectors
All other Jumpers and Connectors are reserved for other Telit M.2 products or
for future use.
