SL869 SW User Guide
1VV0301002 Rev.6 – 2013-10-1
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 18 of 25
Mod. 0806 2011-07 Rev.2
3.11.
$PSTMGPSRESET
This command is used to reset the GPS receiver engine. It does not reboot the GNSS
firmware. There are no parameters for this command, and there is no response message to
this command.
Synopsis
:
$PSTMGPSRESET<cr><lf>
3.12.
$PSTMGETSWVER
This command allows the user to get the versions of the libraries embedded within the
firmware application. It also allows the user to get the Telit firmware application version
string, which is also output in a GPTXT message when the SL869 starts up.
Synopsis
:
$PSTMGETSWVER,<Id><cr><lf>
Parameter Format
Description
Id
Integer
Identifier representing the specified library or libraries for
which the version number is being requested
0 – GNSS Library
1 – OS20 Library
2 – SDK Application
4 – WAAS Library
6 – Binary Image
255 – Telit Version
The SL869 responds with the following message format for all valid input parameter values
except for 255:
$PSTMVER,<Lib>_<Ver>_<Type>*<checksum><cr><lf>
Parameter Format
Description
Lib
Fixed Text
Text string indicating the requested library:
- GNSSLIB
- OS20LIB
- GPSAPP
- WAASLIB
- BINIMG
Ver
x.x.x.x
Library version, for example 7.3.1.43
