Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 62 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 62 2019-08-05
4.2 Time Setting
4.2.1 Set System Time
4.2.1.1 Manual Setting
This command is used to set the GS node’s system time to the time specified as the
parameters and returns the standard command response. GS node expects either one of the
time parameters.
Command Syntax AT+SETTIME=[<dd/mm/yyyy>,<HH:MM:SS>][,System time in
milliseconds since epoch (1970)]
Parameter Description
Table 26, page 62 describes the Set System Time parameters.
Synchronous Response
Table 27, page 62 describes the synchronous responses and remarks for the Set System
Time command.
Example -1
AT+SETTIME=02/06/2016,15:00:00
OK
Example -2
AT+SETTIME=,1493788674000
OK
AT+GETTIME=?
3/5/2017,5:17:58,1493788678792
OK
Example
Table 26 Set System Time Parameters
Parameter Optional/Mandatory Description
dd/mm/yyyy Mandatory It specifies the date in dd/mm/yyyy format.
HH:MM:SS Mandatory It specifies the time in HH:MM:SS format.
System time in
milliseconds since epoch
(1970)
Optional
It specifies the system time in milliseconds
since epoch (1970).
Table 27 Set System Time Synchronous Responses
Responses Remarks
OK Success
ERROR:INVALID INPUT For invalid input