Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 117 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 117 2019-08-05
Synchronous Response
Table 93, page 117 describes the synchronous responses and remarks for the Association
Keep Alive Timer command.
Example Use Case AT+WA=GainSpanDemo
OK
OK
AT+PSPOLLINTRL=60
OK
5.3.7.2 WLAN Keep Alive Interval
This command is used to set the keep-alive interval for n seconds. This keep-alive timer
will fire for every n seconds once the node is associated. This timer will try to keep the GS
node in associated state even if there is no activity between AP and GS node by sending a
NULL frame.
Command Syntax AT+WKEEPALIVE=<Interval>[,<Type>]
Parameter Description
Table 94, page 118 describes the WLAN Keep Alive Interval parameters.
Table 92 Association Keep Alive Timer Parameters
Parameter Optional/Mandatory Value Description
n Mandatory
0 to 255 seconds
0 (default)
When set to 0, the Keep alive timer is disabled.
Table 93 Association Keep Alive Timer Synchronous Responses
Responses Remarks
OK Success
ERROR:INVALID INPUT If parameters are not valid