1vv0301515 Rev.1
Page 21 of 59
2018-07-18
AT+FCLASS=?
(0, 1, 2, 2.0)
OK
Use the Read command to get the current setting.
AT+FCLASS?
0
OK
2.6.2.
Dialing a Phone Number
Use the following AT command to establish a voice call. To perform the voice call you must use
the ";" character at the end of the command.
ATD<number>;
Examples
AT+FCLASS?
0
the current mode is data.
OK
Call the national number 040-4X92XYX.
ATD 0404X92XYX;
OK
Call the national number 040-4X92XYX in international 39-040-4X92XYX.
ATD +390404X92XYX;
OK
If you do not use ";" character, the command returns NO CARRIER message.
ATD+390404X92XYX
NO CARRIER
2.6.3.
Disconnect a Call
Use the following AT command to hang up the current voice call:
ATH
OK
