GE866-QUAD Hardware User Guide
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 70 of 82
Mod. 0805 2011-07 Rev.2
In order to easily rework the GE866 is suggested to consider on the application a 1.5
mm placement inhibit area around the module.
It is also suggested, as common rule for an SMT component, to avoid having a
mechanical parts of the application in direct contact with the module.
NOTE:
In the customer application, the region under WIRING INHIBIT (see figure above)
must be clear from signal or ground paths
.
