Easy GPRS User Guide
80000ST10028 Rev. 0 - 02/01/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 13 of 35
1.3 GPRS context activation and data state entering
This operation corresponds to the dial and connect of a CSD GSM data call issued to an internet
service provider.
•
send command
ATD*99***<cid>#<cr>
where:
<cid>
- is the index number of the desired context to be used (up to 5 different context)
•
wait for response:
Response
Reason
Action
CONNECT
GPRS connection is being
processed
proceed ahead with the
authentication & Packed data
protocol
ERROR
some error occurred
check context parameters and
retry. See par. 1.2.1, 1.2.2,
1.2.3
check also Network registration
status.
+CME ERROR: <error code>
some error occurred
check context parameters and
retry. See par. 1.2.1, 1.2.2,
1.2.3
check also Network registration
status.
For example:
1- Let's assume you want to activate and enter the GPRS state with context number 1(cid) written
before with your GPRS requested QoS parameters:
command:
ATD*99***1# <cr>
response
CONNECT
At this point, your application should start the PPP protocol with the LCP Exchange phase:
Î
LCP Configure Request
Summary of Contents for GE864-PY
Page 1: ...Easy GPRS User Guide 80000ST10028 Rev 0 02 01 07...
Page 16: ......
