Telit Wireless Solutions GE864 DUAL V2, Hardware User'S Manual

Page: 7 / 77

GE864-QUAD V2 Hardware User Guide
1vv0300841 Rev.5 – 2017-05-11
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights
Reserved.
Page 7 of 77
1.4. Document Organization
This document contains the following chapters:
Chapter 1: “Introduction” provides a scope for this document,
target audience, contact and support information, and text
conventions.
Chapter 2: “Overview” provides an overview of the document.
Chapter 3: “ GE864-QUAD V2 Mechanical Dimensions”
Chapter 4: “ GE864-QUAD V2 Module Connections” deals with the
pin out configuration and layout.
Chapter 5: “Hardware Commands” How to control the module via
hardware.
Chapter 6: “Power supply” Power supply requirements and
general design rules.
Chapter 7: “Antenna” The antenna connection and board layout
design are the most important parts in the full product design
Chapter 8: “Logic Level specifications” Specific values
adopted in the implementation of logic levels for this module.
Chapter 9: “Serial ports” The serial port on the Telit GE864-
QUAD V2 is the core of the interface between the module and
OEM hardware
Chapter 10: “Audio Section overview” Refers to the audio
blocks of the Base Band Chip of the GE864-QUAD V2 / Telit
Modules.
Chapter 11: “General Purpose I/O” How the general purpose I/O
pads can be configured.
Chapter 12:
“
DAC and ADC Converter
”
How the DAC and ADC pads can
be configured.
Chapter 13:
“
Mounting the GE864-QUAD V2 on the application
board
”
Recommendations and specifics on how to mount the module
on the user
’
s board.