Telit Wireless Solutions EVK4 User Manual Download Page 2

Telit EVK4 User Manual 

 

1VV0301591 Rev. 0  

Page 

2

 of 

41 

2019-04-01

 

 

 

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 

NOTICE 

 

While reasonable efforts have been made to assure the accuracy of this document, Telit 
assumes no liability resulting from any inaccuracies or omissions in this document, or from 
use of the information obtained herein. The information in this document has been carefully 
checked  and  is  believed  to  be  reliable.  However,  no  responsibility  is  assumed  for 
inaccuracies  or  omissions.  Telit  reserves  the  right  to  make  changes  to  any  products 
described herein and reserves the right to revise this document and to make changes from 
time to time in content hereof with no obligation to notify any person of revisions or changes. 
Telit  does  not  assume  any  liability  arising  out  of  the  application  or  use  of  any  product, 
software, or circuit described herein; neither does it convey license under its patent rights 
or the rights of others. 

It  is  possible  that  this  publication  may  contain  references  to,  or  information  about  Telit 
products (machines and programs), programming,  or services that are not  announced in 
your  country.  Such  references  or  information  must  not  be  construed  to  mean  that  Telit 
intends to announce such Telit products, programming, or services in your country. 

COPYRIGHTS 

This instruction manual and the Telit products described in this instruction manual may be, 
include  or  describe  copyrighted  Telit  material,  such  as  computer  programs  stored  in 
semiconductor memories or other media. Laws in the Italy and other countries preserve for 
Telit  and  its  licensors  certain  exclusive  rights  for  copyrighted  material,  including  the 
exclusive right to copy, reproduce in any form, distribute and make derivative works of the 
copyrighted  material.  Accordingly,  any  copyrighted  material  of  Telit  and  its  licensors 
contained herein or in the Telit products described in this instruction manual may not be 
copied,  reproduced,  distributed,  merged  or  modified  in  any  manner  without  the  express 
written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed 
to  grant  either  directly  or  by  implication,  estoppel,  or  otherwise,  any  license  under  the 
copyrights, patents or patent applications of Telit, as arises by operation of law in the sale 
of a product. 

COMPUTER SOFTWARE COPYRIGHTS 

The  Telit  and  3rd  Party  supplied  Software  (SW)  products  described  in  this  instruction 
manual  may  include  copyrighted  Telit  and  other  3rd  Party  supplied  computer  programs 
stored  in  semiconductor  memories  or  other  media.  Laws  in  the  Italy  and  other  countries 
preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted 
computer  programs,  including  the  exclusive  right  to  copy  or  reproduce  in  any  form  the 
copyrighted  computer  program.  Accordingly,  any  copyrighted  Telit  or  other  3rd  Party 
supplied SW computer programs contained in the Telit products described in this instruction 
manual may not be copied (reverse engineered) or reproduced in any manner without the 
express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase 
of Telit products shall not be deemed to grant either directly or by implication, estoppel, or 
otherwise, any license under the copyrights, patents or patent applications of Telit or other 
3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that 
arises by operation of law in the sale of a product.  

 

Summary of Contents for EVK4










































Reviews: