S42
Hardware User Guide
1VV0301303 Rev. 11
Page 11 of 85
2021-05-06
Not Subject to NDA
•
8/9/10/12bit ADC
•
Arm® CortexTM-M4F core for embedded profiles or application software
•
Manufactured in conformance with RoHS2
•
Operating temperature -40 ... +85 °C
•
Weight: 0,7 g
2.2.
Applications
The S42 is designed to be used in low power applications, like sensor devices.
Some typical applications are described in this chapter.
Supported profiles are:
•
Terminal I/O
•
GATT based LE-profiles
Note/Tip: Support for any additional profile is possible on request.
2.3.
General Cable Replacement
In case there is no standardized application specific profile available the S42
offers Telit’s Terminal I/O profile, which
allows transparent data transfer over UART and
supports Secure Simple Pairing, making the pairing process easy and the connection
secure. Terminal I/O is available for iOS and Android as well as implemented in Telit’s
dual mode module SR.
2.3.1.
Industry
S42 can be used to monitor and control motors, actuators, values, and entire
processes.
2.3.2.
POS/Advertising
S42 supports iBeacon or similar applications.
2.3.3.
Healthcare and Medical
Usage of Bluetooth is aimed mainly at devices that are used for monitoring vital data.
Typical devices are blood glucose meter, blood pressure cuffs and pulse ox meters.
