Connections Panel
The back side panel is where the connectors are for external equipment
including the Power Supply, Ethernet jack, and the external audio system that
receives the TELink
®
1250i 's output. Also located here are the Impedance
Switch and the Power Switch.
Figure 2 - Side Panel Diagram
Ethernet Jack
– Used to connect to your Local Area Network (LAN).
BGM Input
– Used to connect to an external BGM source.
Audio Output
– Select one of the following Impedances with the Impedance
Switch.
8
Ω
Audio Output
– Used to connect an external 8 Ohm speaker or
headphones.
1K
Ω
Audio Output
– Used to connect to an external audio system such
as a KSU/PBX Phone System or an amplifier.
Power Switch
– Used to turn the unit Off/On.
Power Supply
– Used to supply power to the unit.
TELink 1250i
7 8/17/2004
