TELIKOU
TM-800 with Tally Eight Channel Main Station
3
IFB function is activated. Channels 5-8 become four IFB channels. Any channel TALK
button of 5-8 is pressed ON, the channel 1-4 are turned off automatically, also background
input. Only microphone signal is sent to the channel.
The working mode for TALK / IFB Button:
PTT:
Hold the button, the channel is connected, release the button, the channel is cut off;
LATCH:
Quick single press the button in 200ms, the channel is latched on. Press button again,
the channel is cut off.
7. TALK Button
Press channel TALK button, the microphone signal is sent to corresponding channel. The
button lights GREEN.
The working mode for TALK Button:
PTT:
Hold the button, the channel is connected, release the button, the channel is cut off;
LATCH:
Quick single press the button in 200ms, the channel is latched on. Press button again,
the channel is cut off.
8. Program Feed
Turn the switch up or down will send the external input signal to intercom channel.
ON:
Activated channel always receives external program signal.
OFF: External program signal can not be sent into system.
INT:
Activated channel receives external program signal. Activated channel receives
external program signal. It will be interrupted when microphone is turned on.
9. Program Feed LED
This LED lights when Program Feed function works.
10. Program Level Control
Adjust program audio level which goes into TM-800 with Tally, by clockwise or
counterclockwise direction.
11. Power
Power switch
12. Power LED
This green LED constantly lights on when power supply working properly. If TM-800 with Tally
has any circuit short problem, it will keep on flashing until the problem has been solved.
