NT910G
User Manual - Telic AG
Pg 3
1
General Terms and Conditions
This technical description contains important information for the installation and use of the NT910G
Terminal. Read it carefully before you start working with the NT910G Terminal.
We cannot be held responsible for material loss or personal injury that is due to non-compliance with
the safety instructions. The warranty will be void in such circumstances.
Telic reserves the right to change the included information without prior notice and does not take
responsibility for errors in the document and/or for any missing information.
1.1
General Information
This Installation Manual consists of the following chapters:
Chapter
Description
1
General Information provides basic information such as the conventions for the warning
levels, applicable related documentations, used abbreviations, a revision history and
contact information.
2
Product Description provides a brief overview about the mechanical specification of the
product (including size and weight) as well as an overview of the functions and features
of the device as well as the available accessories.
3
Safety and Product Care addresses the audience for this manual, the indented use of
this device and safety-related information important to read before using the device.
4
Electrical Description describes the electrical characteristics and pin allocation of the
device’s connectors.
5
Operation provides details relating to the commissioning of the device, including
details on activating special features such as the low power mode.
6
Installation of the modem provides important instructions about how to install the
device for the M2M application.
1.2
Contact for Support
Please submit your request to TELIC AG customer support using the following online form:
https://www.telic.de/en/contacts/support-request
Information about Telic AG, products and accessories, including FAQs, are available from the following
web site:
